KILEWS SMART INDUSTRIAL TORQUE DISPLAY
KL-CTDS / KL-MCTDS5 SYSTEM SCHEMATIC
Bar Code Reader
RS-232 Port
PLC I/O
Status Lamp and Buzzer
AC110-240V
SKD-(L)(T)(R)BNK Series
(KL-CTDS Connect a screwdriver version)
(KL-MCTDS5: Connect the five screwdrivers version)
SKP-BE32HL/SKP-40B-HL(-800)
KL-CTDS TORQUE DISPLAY
Product Features
-
4 digits and 7 segment of torque display
-
16 x 2 LCM display settings
-
Password and key control to avoid operator adjusting settings.
-
Counting preference set up (count up and count down)
-
Slow start time 0.0-9.9 sec
-
Slow start speed (10%~90%, L1~L9)
-
Workpiece in place sensor (on/off)
-
Set up fastening thread range
-
I/O signal (mos-relay)
-
RS-232 interface for data output, storage and use of barcode scanner
-
99 data storage
-
Set up fastening time range
-
Set up fastening torque range
-
Error code
-
Auto leaning
-
Change torque unit
-
Offset setting
-
External start
-
External reverse
-
External disable tool
-
External confirm
KL-MCTDS5 TORQUE DISPLAY
Product Features
-
4 Digits and 7 Segment of torque display
-
24x4 LCM display settings
-
Password and key control to avoid operator adjusting settings.
-
Counting preference set up (count up and count dow)
-
Slow start time 0.0~9.9 sec.
-
Slow start speed (10%~90%, L1~L9)
-
Workpiece in place sensor (on/off)
-
Set up fastening thread range
-
I/O signal (mos-relay)
-
RS-232 interface for data output, storage and use with barcode scanner
-
99 data storage
-
Set up fastening time range
-
Set up fastening torque range
-
Error code
-
Auto learning
-
Change torque unit
-
Offset setting
-
External start
-
External reverse
-
External disable tool
-
External confirm
-
Slot for SD memory card
-
Built-in power
-
Ethernet
-
99 sequences set up
SKD-BN800 / SKD-BNK800 (Apply for Torque Display Series)
Product Features
-
Brushless feature is applicable in a clean-room environment. The output of torque is highly stable. It is not only an easy-operate equipment but also be operated continuously for a long period.
-
One LED n the housing is to remind the operators that the screwdriver is connecting to the power controller.
-
Besides, it is a non-carbon, low noise equipment and low voltage.
-
The choice when composing the vertical's internal parts and/or any large-size electric equipment, including home appliances, LED/LCD panels and etc.
-
Optional accessories spring balancer hoist or pistol grip can be added for easy and safe operation.
SKD-BK900 / SKD-BNK900 (Apply for Torque Display Series)
Product Features
-
Whole series use brushless motor, no carbon pollution, and low noise motor operation. It is the fit for assembling power torque products.
-
Assemble large-sized LED/LCD panel and home appliances. Tools can be hanged with spring balancer to lessen work fatigue.
-
SKD-BK900 series torque range can replace pneumatic screwdriver to avoid unstable torque due to the fluctuation of the air pressure. Also can prevent oil and noise pollution and achieve energy saving and more Eco-friendly.
-
SKD-BK900 series can be equipped with side handle, or Auxiliary Arm, to increase the torque stability and accuracy.
-
Suitable for assembling large-scale work pieces in semi-automatic or full automatic assembly line. In particular, the most suitable for applications such as automotive industrial parts assembly, air conditioning, electricity, telecommunications, large appliances and medical equipment assembly.
-
Highly mobility, easy to operate, stable torque, high efficiency. Motor can be free from fatigue under long-working hours.
SKD-TBN(K) / SKD-TBNK (Apply for Torque Display Series)
Product Features
-
Whole series use brushless motor, no carbon pollution, and low noise motor operation. It is the fit for assembling power torque products.
-
Assemble large-sized LED/LCD panel and home appliances. Tools can be hanged with spring balancer to lessen work fatigue.
-
SKD-TBK(K)series torque range can replace pneumatic screwdriver to avoid unstable torque due to the fluctuation of the air pressure. Also can prevent oil and noise pollution and achieve energy saving and more Eco-friendly.
-
SKD-TBK(K) series can be equipped with side handle, which can increase stable torque output, torque precision, and easier for user to operate.
-
Suitable for assembling large-scale work pieces in semi-automatic or full automatic assembly line. In particular, the most suitable for applications such as automotive industrial parts assembly, air conditioning, electricity, telecommunications, large appliances and medical equipment assembly.
-
Highly mobility, easy to operate, stable torque, high efficiency. Motor can be free from fatigue under long-working hours.
SKD-BE800 SERIES
Product Features
-
Brushless motor, the perfect combination between screw counter and electric screwdriver, and most fit for operating in clean-room environment.
-
SKD-BE series is one compact of LED counter and electric screwdriver. Two-color housing, easy to operate, suitably used on production line and effectively control numbers of fastening screws and operation quality.
-
Easy to set up, complete function, user can set up this counter according to needs of work and leave system automatically to inspect the precision of fastening screws.
-
This system can set up Effective count Numbers(SC), Automatic Zero(At), Start Detect Time(Lt), Stop Time (Ht), Double Confirm Time after Fastening(LL), Waiting Time between Two Screws. Professional designs for the needs of users.
-
Automatic Learning can complete necessary time from start to fasten, let user confirm whether it is an ideal fastening value.
-
Signal output by OK ALL/OK ONE/N.G. in the screwdrivers, open collector. The user can select another wire to connect PLC if necessary.
-
If start time doesn't stop as over Ht time, that means stripped or wrong screw; if start time stops before Lt time, that means screws stuck or wrong. This function can effectively determine whether screw fastening is right or wrong.
-
After setting up screws fastening, shut-off can be confirmed just one time during pre-set time.
SKD-BN800 (VACUUM TYPE) SERIES
Product Features
-
Vacuum screwdriver was taking the series of SKD-BN800L/P as reference and being created by adding the vacuum head. The main purpose is sucking the non-magnetic screws, such as plastic screws / aluminum-made screws / stainless steel screws and any other screws that does not contain magnetic.
-
Any type and specification of screws can be sucked which only need to replace the head to KS-5B.
-
The suction of vacuum pump is powerful; if the screws tray is using together, it will be more convenient and easy. The screws can be placed at the tray first and then sucked by the vacuum screwdriver.
-
CE and ETL are optional.
SKD-BN800LM SERIES
Product Features
-
Simply put a vacuum flange onto SKD-BN800L series for picking up non-magnetic type screws, such as plastic, aluminum, and stainless steel made screws.
-
For different dimension screws by switching different bit nozzles without changing vacuum flange.
-
The small and handy exclusive vacuum pump is available for all vacuum type of screwdrivers.
-
For better and efficient way is to place all screws over a screw setter and then use vacuum type screwdrivers.
SCREW COUNTER (FOR BRUSHLESS SCREWDRIVERS)
SKP-BC40HL(N) / SKP-BC40HL-800 (COUNTER / POWER SUPPLY / SLOW-START)
Product Features
-
High / Low speed switch / HI/LO voltage switch protection function
-
Slow start time (0.0-9.9 second)
-
Slow start speed level (35%-100% of normal speed, L0-L9)
-
Target reached Confirm (enable / disable)
-
Input / Output function control
-
External start Input Control
-
External reverse Input Control
-
External confirm Input Control
-
Expanding 5 sets data memory
-
Auto-Learning function for time monitoring
-
Before tightening reverse
-
After tightening reverse
-
Counting mode (count up / count down)
-
Signal output (OK 1 / OK ALL / N.G.)
-
Cancel NG signal (Use externa Clear of Confirm button to cancel NG signal.
-
Operation complete time
-
Self locking when counter detect error (enable / disable)
-
Sensor mode (Applications according to different operation use)
-
Error code by monitoring
-
Self anti-interference capability
EXTERNAL DIMENSION
.png)
SKD-BN800 L/P Series
SKD-LRBK Series
SKD-TBK L Series
SKD-RBK L/P Series
.png)
SKD-BK900L/P Series
AUTOMATIC SCREW FEEDER KFR-1050
Product Features
-
WIDEST RANGE OF APPLICABLE SCREW SIZES:
-
Between 1.~5,0mm (Incl,: 1.0mm, 1.2mm, 1.4mm, 1.7mm, 2.0mm, 2.3mm, 2.6mm, 3.0mm, 3.5mm, 4.0mm, & 5.0mm) 11 sizes.​
-
-
MAX OF SCREWS LENGTH & HOPPER CAPACITY
-
Screw Length: Up to 18mm (under screw head)
-
Capacity of hopper: 200~220 c.c.
-
-
APPLICABILITY OF SPECIAL SCREW TYPES
-
Screw Length ≧ Thread Diameter (1=1, 1＜1)​
-
Thickness of screw head ≧ 0.2mm
-
No jamming or failure occurred with these applicable types and affect productivity.
-
-
SIZE OF FEEDING RAIL IS ADJUSTABLE:​
-
Feeding rail can be pulled out for width adjusts to the applied sizes easily. Measurements for width adjusting can be in metric or imperial units.
-
-
SAVE PARTS COSTS & STOCK:​
-
KFR-1050 allows adjusting the width of feeding rail to serve 11 sizes screws, between 1.0mm to 5.0mm diameter. The flexibility prevents dealers from stoking up on quantities for different sizes, and reduces the cost on related accessories for users.
-
-
ADJUSTABLE VIBRATION INTENSITY:
-
With vibration in small amplitude at high strength, it moves screws On rail to pick-up point in good order, no overlay or jamming to affect the speed of movement and productivity.
-
-
HUMANIZED MULTI PROGRAMMING CONTROL:
*Individual drive system for feeding and vibrating operation.
*Setting for suitable stop time without interapt to operate.
*Equipped ground wire, socket & buzzer for operative safety and alarm signal.
*PCB controls for efficiencies of desired speed & timing on each operating step.
*Switching Adaptor allowed AC 100~240V power source for stable DC 15V output. No influences and problems due to the different AC power source of factories locations.
Other Functions
-
PCB designed with short circuit and over load protection.
-
Screw feeder and PCB grounding connection is also available.
-
Power On/Off buzzer alert and blinking LED indicator.
SCREW FEEDER
(FOR VACUUM TYPE SCREWDRIVER AND AUTOMATION SYSTEM)
KFA-0830 / KFA-0850A(H)
Product Features
-
WIDEST RANGE OF APPLICABLE SCREW SIZES:
KFA-0830: Between 0.8~3.0mm (Incl.: 0.8mm, 1.0mm, 1.2mm, 1.4mm, 1.7mm, 2.0mm, 2.6mm, 3.0mm) 9 sizes
​
KFA-0850: Between 1.2~5.0mm (Incl.: 1.2mm, 1.4mm, 1.7mm, 2.0mm, 2.3mm, 2.6mm, 3.0mm, 3.5mm, 4.0mm, 5.0mm) 10 sizes
​​
-
APPLICABILITY OF SPECIAL SCREW TYPES
-
Screw Length: Thread Diameter (1=1, 1＜1)​
-
Thickness of screw head 0.2mm
-
No jamming or failure occurred with these applicable types and affect productivity.
-
​​
-
BRUSHLESS MOTOR:​
-
Adopting durable made in Japan brushless motor.
-
​​
-
CHANGEABLE RAILWAY​
High precision wire cut adjustable railway. Adjustable rail, screw size from 0.8mm up to 3.0mm.
​
-
HORIZONTAL LINEAR FEEDING:
-
Horizontal linear feeding, adopting durable aluminum extruded rail.
-
Screws are carried on a horizontal track for smooth feeding.
-
​​
-
ADOPTING MULTI-FUNCTIONAL:
Adopting multi-functional smart PCB with material shortage alert and screw taking counting ffunction in digital display. (Please contact our service center for detail information.)
​
-
SIGNAL OUTPUT FUNCTION
With screws in position signal output function.
Other Functions
-
PCB designed with short circuit and over load protection.
-
Screw feeder and PCB grounding connection is also available.
-
Power On/Off buzzer alert and blinking LED indicator.
KFA-0830
VACUUM PICK UP
KFA-0850A
(VACUUM PICK UP)
KFA-0850H
(MANUAL PICK UP)
TORQUE METERS
KTM-1000, KTM-250, KTM-150
Product Features
-
LED can identify the test range of torque setting by needed user. If the result is not complying to torque range setting, light will be warned.
-
USB connector is used for data output: It is convenient for user to work with computer.
-
Auto-zero can be selected and zero reset becomes unnecessary for user.
-
Automatically test values about maximum, minimum and mean.
-
Products are suitable for shut off type screwdriver only.
Other Functions
-
PCB designed with short circuit and over load protection.
-
Screw feeder and PCB grounding connection is also available.
-
Power On/Off buzzer alert and blinking LED indicator.
AUXILIARY ARM SERIES
AUXILIARY ARM
KP-AUXA, KP-AUX1T
-
Provide with the rocker arm, enable to revolve on 360 degrees.
-
Main shaft can be extended to maximum 830mm
-
Power arm inside includes nitro gas stick, allow user to grab the arm easily, automatic lift up to position after finishing the work.
-
Easy to assemble and disassemble.
-
Optional accessory KP-VA1, KP-VA2, KP-VAR (90 degree adapter) is available for user to adjust angle in accordance with the object to be fastened.
KP-VAR, KP-VA1
AUXILIARY ARM SERIES
KP-AUX-GC18A & I Series
Model
KP-AUX-GC18I-600
KP-AUX-GC18I-1000
KP-AUX-GC18A-600
KP-AUX-GC18A-1000
SCREWDRIVER I/O SIGNAL CONTROL BOX, SLOW START CONTROL MODULE, 90 DEGREE ATTACHMENT
KL-SCBSN, KL-SSBN, K-1, KL-3
Screwdriver I/O Signal Control Box
(For Manual / PLC)
KL-SCBSN
-
Slow Start time (0.0~9.9 second)
-
Slow start Speed Level (30%~100% of normal speed, L0-L9)
-
Operation Time (0.0~9.9 second)
-
Target Reached Confirm (enable/disable)
-
Brake Signal Hold Time (start off/next start off)
-
External Start Input Control
-
External Reverse Input Control
-
Signal output (Start, Stop, Reverse)
(L)(R)(T)BK
SCREWDRIVER
KL-SCBSN
SKP-40B-HL(N)
BN POWER CONTROLLER
SKP-40B-HL-800
(L)(R)(T)BK POWER CONTROLLER
Slow Start Control Module
KL-SSBN
-
BYPASS: Automatically disable slow start function when screwdriver in reverse rotation, easier to reverse screws.
-
Adjustable slow start speed from 30% to 100% of normal speed, Slow start level setting from L1-L2-L3-.... L9-L0
-
Provide output start signal / break signal / forward and reverse signal with MOS relay switch
-
Compatible with KILEWS Brushless DC SKD-BN / BK series
-
Slow start time can be set from 0.1s up to 9.9 second
-
Dimension: 58x95x35mm (LxWxH)
90 Degree Attachment
90 Degree Attachment KL-1
KL-3
ACCESSORIES
.png)
.png)
-
The new screwdriver holder series can be fixed on the table or wall. Position angle of the rack can be adjusted for operator easier to pick up and restore the screwdriver.
.png)
.png)
